MIL-DTL-24402F(SH)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-167-1
-
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental
and Type II - Internally Excited)
MIL-STD-1651
-
Insert Arrangements for MIL-C-5015, MIL-C-22992 (Classes C, J, and
R), and MIL-C-83723 (Series II) Electrical Connectors
MIL-STD-2193
-
Ship Hydraulic System Components
(Copies of these documents are available online at https://quicksearch.dla.mil.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9074-AR-GIB-010/278
-
Requirements for Fabrication Welding and Inspection, and Casting
Inspection and Repair for Machinery, Piping, and Pressure Vessels
(Copies of this document are available from online at https://nll.ahf.nmci.navy.mil, may be requested by phone at
215-697-2626, or may be requested by email at nllhelpdesk@navy.mil. This publication can be located by
searching the Navy Publications Index for the TMIN without the suffix.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
NATIONAL FLUID POWER ASSOCIATION (NFPA)
NFPA T2.6.1
-
Fluid Power Components - Method for Verifying the Fatigue and
Establishing the Burst Pressure Ratings of the Pressure Containing
Envelope of a Metal Fluid Power Component
(Copies of this document are available from www.nfpa.com.)
SAE INTERNATIONAL
SAE-AS1290
-
Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems
SAE-AS34521
-
Connector, Receptacle, Electric, Box Mounting, Rear Release, Crimp
Contact, AN Type With
SAE-J2321
-
Ship Systems and Equipment -- General Specification for Filter Elements
-- Hydraulic and Lube Oil Service
SAE-J2321/2
-
Disposable Hydraulic Filter Element - 190 L/min Flow, 21 MPa Collapse
Pressure, Filtration Ratio = 75 at 7 μm
SAE-J2321/3
-
Disposable Hydraulic Filter Elements - 21 MPa Collapse Pressure,
Filtration Ratio = 75 at 10 μm, 75 to 175 L/Min
(Copies of these documents are available from www.sae.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business