MIL-PRF-52308J
2.2 Non-Government publications. The following document(s) form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of the documents which are
DoD adopted are those listed in the issue of the Department of Defense Index of Specifications
and Standards (DoDISS) cited in the solicitation. Unless otherwise specified, the issues of
documents not listed in the DoDISS are the issues of the documents cited in the solicitation (see
6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D 3240
-
Standard Test Method for Undissolved Water in Aviation Turbine
Fuels. (DoD adopted)
ASTM D 5006
-
Standard Test Method for Measurement of Fuel System Icing
Inhibitor (Ether Type) in Aviation Fuels. (DoD adopted)
(Application for copies should be addressed to The American Society for Testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
AMERICAN PETROLEUM INSTITUTE (API)
API 1581
-
Specification and Qualification Procedures for Aviation Jet Fuel
Filter Separators, Fourth Edition.
(Application for copies should be addressed to The American Petroleum Institute, Order
Desk, 1220 L Street, N.W., Washington, DC 20005-4070.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Materials. Material used shall be in accordance with the manufacturer's materials
specifications for filter-coalescer elements, hereinafter referred to as "elements". The materials
shall be capable of meeting all of the operational and environmental requirements specified
herein. Materials used shall be compatible with petroleum fuels containing water, salt water, and
additives as specified with no evidence of deleterious effect. Materials in contact with test
waters shall be corrosion resistant. Zinc or cadmium plating, or use of brass, bronze and other
copper bearing alloys shall not be permitted. Recovered materials should be used to the
maximum extent practicable (see 6.7). Used, rebuilt or remanufactured components, pieces and
parts shall not be incorporated in the element.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business