WW-F-2849
(Non-Government standards and other publications are normally available from
the organizations that prepare or distribute the documents. These documents
also may be available in or through libraries or other informational services, )
2.3 Order of Precedence.
In the event of a conflict between the text of
this document and the references cited herein, the text of this specification
takes precedence. Nothing in this specification, however, supersedes applicable
laws and regulations unless a specific exemption has been obtained.
REQUIREMENTS
3.
3.1 First article. When specified (see 6.2), the contractor shall furnish a
complete filter assembly for first article inspection and approval (see 4.2.1
and 6.4).
3.2 Standard commercial product. The filters shall, as a minimum, be in
accordance with the requirements of this specification and may be the
manufacturer's standard commercial product. Additional or better features which
are not specifically prohibited by this specification but which are a part of
the manufacturer's standard commercial product, shall be included in the filters
being furnished. A standard commercial product is a product which has been sold
or is being currently offered for sale on the commercial market through
advertisements or manufacturer's catalogs, or brochures, and represents the
latest production model.
3.3 Materials. Materials used shall be free from defects which would
adversely affect the performance or maintainability of individual components or
of the overall assembly. Materials not specified herein shall be of the same
quality used for the intended purpose in commercial practice. Unless otherwise
specified herein, all equipment, material, and articles incorporated in the work
covered by this specification are to be new and fabricated using materials
produced from recovered materials to the maximum extent possible without
jeopardizing the intended use. The term "recovered materials" means materials
which have been collected or recovered from solid waste and reprocessed to
become a source of raw materials, as opposed to virgin raw materials. Unless
otherwise specified, none of the above shall be interpreted to mean that the use
of used or rebuilt products is allowed under this specification.
3.3.1 Corrosion-resistant steel.
Corrosion-resistant steel shall conform to
the requirements of ASTM A167.
3.4 Design and construction. The complete filter system components required
shall be as specified (see 6.2), The filter system shall be complete so that
when installed and connected to the specified source of electricity (see 3.22)
and piping system, it accomplishes the operation for which it was designed.
Unless otherwise specified (see 6.2), two or more filter tanks shall be required
for a single application and shall be arranged for a parallel operation. The
equipment shall be designed to withstand strains, jars, vibrations, and other
conditions incidental to shipping, storage, and installation. The equipment
shall be so designed and arranged that operating, cleaning, and maintenance
procedures shall be facilitated. The design shall be such as to prevent
conditions hazardous to personnel or deleterious to equipment.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business