WW-F-2849
December 28, 1993
SUPERSEDING
MIL-F-17559D(YD)
2 January 1990
FEDERAL
SPECIFICATION
FILTERS, FLUID, PRESSURE, FEEDWATER
This specification is approved by the Commissioner, Federal
Supply Semite, General Services Administration, for the use
of all Federal agencies.
1.
SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers filter units which will separate and
remove oil, organics, chlorine, and suspended solids from boiler feedwater,
including the raw make-up water.
1.2 Classification. Filters covered by this specification, as applicable,
are of the following types, groups, and styles, as specified (see 6.2).
Type I - Precoat type
Group 1 - Vertical tank
Style A - Vertical leaf or tubular element
Style B - Horizontal tray
Group 2 - Horizontal tank
Style C - Vertical leaf
Style D - Horizontal plate
Type II
- Chemical type
Type III - Disk-cartridge type
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commanding Officer (Code 156), Naval Construction Battalion Center,
1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter
FSC 4330
AMSC N/A
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited .
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business