INCH-POUND
MIL-PRF-52666F
23 September 1998
SUPERSEDING
(See 6.6)
PERFORMANCE SPECIFICATION
FILTER/SEPARATORS, LIQUID FUEL
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1 SCOPE
1.1 Scope. This specification covers 15-, 50-, 100-, and 350-gallon-per-minute (gpm)
filter/separators for use in removing undissolved water and solid contaminants from petroleum
fuels.
1.2 Classification. Filter/separators (F/S) covered by this specification are of the following
types and classes as specified (see 6.2):
Type I
-
15 gpm (57 liters/min) F/S, frame mounted.
Type II
-
50 gpm (189 liters/min) F/S.
Class A
-
Frame mounted.
Class B
-
Unmounted.
Type III
-
100 gpm (379 liters/min) F/S, frame mounted.
Type IV
-
350 gpm (1325 liters/min) F/S, frame mounted.
2 APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirement documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-D/210, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 4330
Distribution Statement A. Approved for public release, distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business