MIL-F-52429F
(Application for copies should be addressed to the AMERCN SCTY OF
MECHANICAL ENGINEERS, 345 E 47TH STRET, NEW YORK NY 10017.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
D 3953
Flat Steel Strap and Connectors.
D 4675
Selection and Use of Flat Strapping Material.
(Application for copies should be addressed to the AMERCN SCTY FOR TEST &
MTRLS , 1916 RACE STRET, PHILADELPHIA PA 19103.)
AMERICAN WELDING SOCIETY, INC. (AWS)
D1.2
- Structural Welding Code - Aluminum.
(Application for copies should be addressed to the AMERCN WELD SCTY, 550 NW
LEJEUNE RD, PO BOX 351040, MIAMI FL 33135.)
NATIONAL MOTOR FREIGHT TRAFFIC ASSOCIATION INC., AGENT
National Motor Freight Classification Rules.
(Application for copies should be addressed to the AMERCN TRCKNG ASSN, INC,
ATTN TRFC ORDR SECT, 2200 MLL RD, ALEXANDRIA VA 22314.)
UNIFORM CLASSIFICATION COMMITTEE AGENT
Uniform Freight Classification Rules.
(Application for copies should be addressed to the UNFRM CLASS CMMTE, ATTN
TARIFF PBLSHNG OFCR, ROOM 1106, 222 S RIVSIDE PLZ, CHICAGO IL 60606.)
(Non-Government standards and other publications are normally available
from the organizations that prepare or distribute the documents. These
documents also may be available in or through libraries or other informational
services.)
2.3 Order of precedence .
In the event of a conflict between the text of
this document and the references cited herein, the text of this document takes
Nothing in this document, however, supersedes applicable laws and
precedence.
regulations unless a specific exemption has been obtained.
.
3. REQUIREMENTS
The filter-separator shall be in accordance with top
3.1 Description.
The filter-separator shall
assembly TA13217E6620 and as specified herein.
consist essentially of a vertical aluminum vessel with removable head, a
manually operated air vent, inlet and outlet connections, filter-coalescer
element, separator stage such as a canister, a differential pressure gauge, a
water level sight gauge, a manually operated water drain valve, and a ground
The filter-separator shall be
rod, a ground cable, and attaching hardware.
mounted on a skid
The general requirements, operating and environmental
conditions shall be in accordance with MIL-F-8901.
The filter-separator shall
have a rated flow of 15 gpm (57 liters per minute) and a maximum working
pressure of 25 pounds per square inch (psi) (1.7 bars).
The drawings forming a part of this specification are end
3.1.1 Drawings.
No deviation from the prescribed dimensions or tolerances
product drawings.
Where
is permissible without prior approval of the contracting officer.
tolerances could cumulatively result in incorrect fits, the contractor shall
provide tolerances within those prescribed on the drawings to ensure correct
fit, assembly. and operation of the filter-separator
Any data (e.g., shop
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business