4.7.1.2 Sampling.
Sample size shall be determined by using table I and
table IIa of MIL-STD-105. A lot shall be accepted when zero defects are found
and rejected when one or more defects are found.
119.
Filter-coalescer element and canister not installed (see 5.1).
Dust plug and dust cap not installed (see 5.1).
120.
Drain valve not closed (see 5.1).
121.
Extra elements not preserved as specified (see 5.1.1).
122.
Extra O-ring and sight gauge gasket not preserved as specified (see
123.
5.1.2).
Consolidation of components not as specified (see 5.1.3).
124.
Each filter-separator and components not secured within the box in a
125.
manner to prevent free movement and damage as specified for level A or
B (see 5.2.1 and 5.2.2).
Shipping container not as specified for level A and level B.
126.
Level C packing not in accordance with the reference document
127.
(see 5.2.3).
Marking missing, illegible, incorrect, or incomplete for level A, B,
128.
or C (see 5 3).
PACKAGING
5.
5.1 Preservation.
The filter-separator with filter-coalescer elements and
canisters installed shall not require preservation (see 6.7).
The water drain
valve shall be closed after cleaning and drying has been completed in
Dust plug and cap shall be installed.
accordance with 3.13.
Each extra element, except
5.1.1 Extra filter-coalescer elements.
Government-furnished elements that meet this requirement when delivered to the
contractor (see 3.7), shall be preserved by the following method:
Each filter element shall be inserted in a polyethylene bag fabricated from
material conforming to L-P-378, type I, class 1, grade and finish optional,
thickness not less than 0.0040 inches, and closed by heat sealing. The bag
containing the element shall be placed in a close-fitting box conforming to
PPP-B-636, W6c. The box shall be closed and sealed as specified for method
V in the appendix to the box specification using tape conforming to
PPP-T-60, type IV.
5.1.2 Extra O-rings and extra sight gauge gasket.
Each extra O-ring and
the extra sight gauge gasket shall be laid flat between two slightly larger
pieces of fiberboard and each individually preserved in accordance with
MIL-P-116, submethod IC-1.
5.1.3 Consolidation.
The extra filter elements, O-rings, sight gauge
gasket, and the adapter and sampling probe, when furnished, shall be
consolidated together in one or more boxes as applicable, conforming to
PPP-B-636, W5c.
The contents shall be blocked, braced, or cushioned as
applicable to prevent movement or damage
Box closure and sealing shall be as
specified for method V in accordance with the appendix to the box
specification.
Packing shall be level A, B, or C as specified (see 6.2).
5.2
Packing.
Each filter-separator and the boxes containing the extra
5.2.1 Level A.
O-rings, sight gauge gasket, adapter and sampling probe, and the extra filter
elements required shall be packed together in a close-fitting box conforming
The contents shall be secured
to PPP-B-601, overseas type, style optional.
wit hin the box in a manner to prevent free movement and damage.
The box shall
be closed in accordance with the appendix to the box specification.
Strapping
shall be in accordance with ASTM D 3553. type 1, finish B, size as applicable.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business